几个月前,我在笔记本电脑上安装了Debian 10,我已经设法在日常活动中定期使用它,因此我开始自定义设置。
然后首先验证为笔记本电脑的每个组件安装的驱动程序。我有一台Dell Inspiron灵越15-3567笔记本电脑
根据规格手册的详细信息,笔记本电脑具有第7代Intel Core I3处理器。通过命令验证它,以grep 'vendor_id' /proc/cpuinfo ; grep 'model name' /proc/cpuinfo ; grep 'cpu MHz' /proc/cpuinfo
获取以下信息:
vendor_id : GenuineIntel
vendor_id : GenuineIntel
vendor_id : GenuineIntel
vendor_id : GenuineIntel
model name : Intel(R) Core(TM) i3-7020U CPU @ 2.30GHz
model name : Intel(R) Core(TM) i3-7020U CPU @ 2.30GHz
model name : Intel(R) Core(TM) i3-7020U CPU @ 2.30GHz
model name : Intel(R) Core(TM) i3-7020U CPU @ 2.30GHz
cpu MHz : 600.002
cpu MHz : 600.045
cpu MHz : 600.082
cpu MHz : 600.004
然后使用lspci命令查看内核已与处理器关联的PCI控制器,找到以下内容:
diego@computer:~$ lspci -v
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 03)
Subsystem: Dell Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation Device 5921 (rev 06) (prog-if 00 [VGA controller])
Subsystem: Dell Device 078b
Flags: bus master, fast devsel, latency 0, IRQ 127
Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 03)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
Flags: fast devsel, IRQ 16
Memory at d1320000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 124
Memory at d1310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
我观察到的第一个细节是该处理器被识别为“英特尔公司Xeon E3-1200 v6 /第七代核心处理器主机桥”,这与从命令grep'模型名称'/ proc / cpuinfo获得的内容不同。
我的问题是关于以下程序:
到目前为止,我发现了一些教程,在这些教程中,他们告诉我如何知道已安装的驱动程序,但是却没有一个教程告诉我如何更改或优化它们以使笔记本电脑更高效。
感谢您的回答。
我相信lspci
所指的“主机桥”是将CPU连接到PCI总线的PCI主机桥。我有第3代Core i5,我的主机桥说明说:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
我认为这是指主机桥是为与Xeon E3-1200一起使用而设计的,但它恰好与i3 / i5兼容,这大概就是为什么要在主板上使用它。
因此,我认为您没有“错误的” PCI控制器。它是一个兼容的PCI控制器,只是碰巧上贴有指向不同CPU的描述。
另外,我认为来自的描述信息lspci
很可能直接来自主板本身的控制器(即内置芯片),而不是来自驱动程序。您将无法更改它,因为它是主板的一部分。
此外,尝试为PCI总线优化驱动程序不太可能看到任何明显的性能优势。您是否有任何问题表明PCI总线无法正常工作?
本文收集自互联网,转载请注明来源。
如有侵权,请联系 [email protected] 删除。
我来说两句