我有一台4K触摸Dell Precision 5530笔记本电脑,该笔记本电脑带有Intel 630 UHD内部显卡和Nvidia P1000精心打造。
我有2台Dell 4K U2718Q显示器和第三台Dell P2213显示器以及TB16扩展坞。
扩展坞具有4个监视器输出(DP,mDP,HDMI,VGA),并且状态:
Triple Display (maximum
resolution)
DP + mDP+HDMI: 3 x 3840 x
2160 @ 30 Hz
NOTE: DP port at 60 Hz
is supported, but mDP
+HDMI are limited to 30
Hz for 4k
和
Quad Display (maximum
resolution)
**mDP + HDMI + DP + VGA:
3x3840 x 2160 @ 30 Hz + 1x
1920 x1200 (VGA)
NOTE: **Discrete only
mode or “Special
Graphics Mode”.
NOTE: ** Conguration supported with AMD and Nvidia in discrete-only mode or special-graphics mode. These modes are listed
in the BIOS for the following systems: Dell Precision 7510/7529/7710/7720 and will require disabling switchable graphics for
discrete-only mode or enabling special-graphics mode when Switchable is enabled. If the system does not have these options in
the BIOS, then 4 monitors are NOT supported.
因为这是来自扩展坞的手册,所以我假设3台显示器/ 4台显示器不包括笔记本电脑显示器。我知道我不能支持4个外接显示器,因为我没有可切换的图形,但是我想无论何时尝试插入第3个显示器并将台式机扩展到它,我都应该能够支持3个显示器。通过HDMI或VGA)关闭其他显示器之一。
笔记本电脑上还有一个额外的HDMI端口,必要时我可以使用。
知道如何使其工作吗?
我推测戴尔不将笔记本电脑的显示器包括在内,因为它们仅指定了3个外部(显示器)端口。因此,您的型号只能支持笔记本电脑的LCD和2个外接显示器或合上盖子,并可能支持3个外接显示器
该技术页面记录了3个显示,而不是竞争点是哪种类型。至少是检查措辞的另一资源。戴尔可能是唯一可以确认这一点的人,因为措辞可以解释。
-编辑: 码头手册SEEMS的pg34,以确认:If three monitors are connected to the docking station, then the docking station will only support a maximum of two external monitors. Refer to the User Guide of your docking station for information on how to select and activate the desired monitors.
本文收集自互联网,转载请注明来源。
如有侵权,请联系 [email protected] 删除。
我来说两句